Makita DHS680 Technical Information

P 2/ 18
Repair
[1] NECESSARY REPAIRING TOOLS
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
Code No. Description Use for
1R207
1R003 Retaining ring pliers ST-2N
1R032 Bearing setting plate 8.2
1R041 Vise plate
45° Set square
1R208 90° Set square
1R232 Pipe 30
1R269 Bearing extractor
1R282 Round bar for Arbor 8-50
Retaining ring S & R pliers1R291
Wrench for bearing retainer1R316
194385-5 Clamp set
removing/assembling Retaining ring S-34
disassembling Spindle from Helical gear 50
fixing Rotor and Bearing box
adjusting Saw blade angle to 45° bevel
adjusting Saw blade angle to 90° bevel
holding Bearing box when removing Spindle from Helical gear 50
removing Ball bearing
disassembling Spindle from Helical gear 50
removing/assembling Retaining ring S-12
removing/assembling Bearing retainer 19-29
holding Shoulder pin 6-7
[2] LUBRICATION
Apply Makita grease FA No.2 to the following portions designated with the black triangle, and apply lubricant oil
VG100 to the following portions designated with the white triangle to protect parts and product from unusual abrasion.
Fig. 1
Item No. Description Amount
6g approx.
a little
a little
a little
a little
Gear room where Helical gear 50 engages Armature’s gear
O ring 24
Safety cover
Angular guide
O ring 9
Blade case complete
Baring box Drum portion where Safety cover touches
Surface where pivot portion of Blade case touches
Whole potion
[View from Motor housing side]
Portion to lubricate
24
41
58
60
24
41
a
b
a
b
60
M5 +Truss head screw
58
Makita grease FA No.2
Makita lubricating oil VG100

Makita DHS680 Specifications

General

Blade Diameter	165 mm
Max Cutting Capacity at 90°	57 mm
Max Cutting Capacity at 45°	41 mm
Max Cutting Capacity at 50°	37 mm
No Load Speed	5, 000 RPM
Voltage	18 V
Weight	3.3 kg
Arbor	20 mm
Bevel Capacity	0° - 50°