EasyManua.ls Logo

Makita Dolmar PS-5105 User Manual

Makita Dolmar PS-5105
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
REPAIR MANUAL
DCS460
DCS510
DCS5121
EA5000P53G
PS-460
PS-510
PS-5105
Question and Answer IconNeed help?

Do you have a question about the Makita Dolmar PS-5105 and is the answer not in the manual?

Makita Dolmar PS-5105 Specifications

General IconGeneral
Engine Type2-stroke
Bar Length33 cm (13"), 38 cm (15"), 40 cm (16"), 45 cm (18")
Power Rating2.8 kW
Fuel Tank Capacity0.47 L
Oil Tank Capacity0.27 L
Chain Pitch3/8 inch
Power Output2.8 kW / 3.8 PS

Summary

TECHNICAL DATA

TROUBLESHOOTING

SPROCKET GUARD / CHAIN TENSIONING SYSTEM

Chip deflector in the sprocket guard

Instructions for removing the chip deflector.

Chain tensioner

Explanation of chain tensioner function and removal.

CLUTCH DRUM / RIM SPROCKET

CHAIN BRAKE / GUIDE BAR BOLT

Removing the brake band

Steps to remove the brake band.

Removing the handguard and disengagement mechanism

Procedure to remove handguard mechanism.

Removing the circlip

Steps to remove the circlip.

Replacing the guide bar bolt

Procedure for replacing the guide bar bolt.

CLUTCH

Inserting the flyweights

Instructions for inserting clutch flyweights.

Installing the clutch

Procedure for installing the clutch assembly.

OIL PUMP

Removing the oil pump

Procedure for removing the oil pump from the crankcase.

STARTER

Disassembly

Steps for disassembling the starter mechanism.

Assembly

Instructions for assembling the starter mechanism.

IGNITION SYSTEM

Ignition System Troubleshooting

Troubleshooting guide for ignition system issues.

Removing the flywheel

Steps to remove the flywheel.

Removing the ignition armature

Procedure to remove the ignition armature.

Installing the ignition armature

Instructions for installing the ignition armature.

CARBURETOR

Removing the carburetor

Steps to remove the carburetor from the saw.

Removing the intake manifold

Procedure for removing the intake manifold.

CYLINDER / PISTON

CRANKCASE / CRANKSHAFT

TORQUES

Related product manuals