To Next PageTo Next PageWhy the saw chain cannot be installed on my Makita DUC204 Chainsaw?
If the saw chain cannot be installed on your Makita Chainsaw, the combination of saw chain and sprocket is not correct. Use the correct combination of saw chain and sprocket by referring to the section for specifications.
What causes abnormal vibration in my Makita DUC204 Chainsaw?
If your Makita Chainsaw experiences abnormal vibration, immediately stop the machine. Check if the guide bar or saw chain is loose and adjust the tension. If the problem continues, it may indicate a tool malfunction requiring repair by an authorized service center.
Why is the Torque Boost mode not available on my Makita DUC204 Chainsaw after replacing the battery?
If the Torque Boost mode on your Makita Chainsaw is not available after replacing the battery cartridge with a fully charged one, it may be due to usage conditions. Try using the tool in normal mode until the installed battery cartridge is empty, then replace or recharge the battery.
Why is my Makita DUC204 Chainsaw vibrating abnormally?
If you experience abnormal vibration with your Makita Chainsaw, stop the machine immediately! This could be due to a loose guide bar or saw chain. Adjust the guide bar and saw chain tension. If the issue persists, it may indicate a tool malfunction, and you should ask the authorized service center in your region for repair.
What to do if chain does not stop even the chain brake is activated on my Makita DUC204?
If the chain on your Makita Chainsaw does not stop even when the chain brake is activated, stop the machine immediately! The brake band may be worn down, and you should ask the authorized service center in your region for repair.
Why does my Makita Cordless Saw motor stop after a short time?
If the motor of your Makita Cordless Saw stops running after a short period, the battery charge level is probably low. Recharge the battery cartridges, and if that doesn't work, replace the battery cartridge.
What to do if my Makita Cordless Saw chain has no oil?
If there's no oil on the chain of your Makita Cordless Saw, check these things: The oil tank may be empty, so fill it. The oil guide groove may be dirty, so clean it. Or, there may be poor oil delivery, so adjust the amount of oil delivery with the adjusting screw.
Why my Makita DUC204 Chainsaw does not start?
If your Makita Chainsaw doesn't start, it might be due to several reasons. First, ensure a charged battery cartridge is correctly installed. If the battery is low, recharge it or replace it if necessary. Also, check if the main power switch is turned off, as the chainsaw automatically shuts down after inactivity. Turn the main power switch on again to resolve this.
What to do if my Makita Cordless Saw motor stops quickly?
If the motor of your Makita Cordless Saw stops running shortly after you start using it, it probably means that the battery's charge level is low. Recharge the battery. If recharging doesn't solve the issue, replace the battery cartridge.
How to troubleshoot a Makita Cordless Saw that won't start?
If your Makita Cordless Saw doesn't start, here are a few things to check: * Ensure a charged battery cartridge is correctly installed. * Recharge the battery. If it remains ineffective, consider replacing the battery cartridge. * If the main power switch is off (the chainsaw automatically turns off after a period of inactivity), turn it on again.
Typical A-weighted noise levels (sound pressure and power) for DUC204, DUC254, DUC254C models.
General and specific safety guidelines for operating the power tool and chain saw.
Precautions for battery handling, charging, storage, and proper disposal.
Procedures to test the chain brake and run-down brake for proper function.
When and how to sharpen the saw chain, including sharpening criteria.
Methods for sharpening saw chain, including file use and angles.
Table outlining periodic maintenance checks and their frequency.
Table listing malfunctions, their causes, and recommended actions.
General
