To Next PageTo Next PageWhat to do if there is no oil on the chain of my Makita DUC204 Chainsaw?
If you notice no oil on the chain of your Makita Chainsaw, the oil tank might be empty, so refill it. Another possible reason is a dirty oil guide groove, which requires cleaning. You may also need to adjust the amount of oil delivery with the adjusting screw if the oil delivery is poor.
How to troubleshoot a Makita Chainsaw that does not start?
If your Makita Chainsaw does not start, a possible cause is that the battery cartridge is not installed. To fix this, install a charged battery cartridge. Another reason could be a battery problem such as low voltage. In this case, try recharging the battery cartridges; if that doesn't work, replace the battery cartridge. Also, the main power switch might be off. If so, turn the main power switch on again, as the chainsaw automatically turns off if left unused for a while.
Why does my Makita Chainsaw not start?
If your Makita Chainsaw doesn't start, there could be several reasons. First, ensure a charged battery cartridge is correctly installed. If the battery is low, recharge it or replace it if recharging doesn't help. Also, check that the main power switch is turned on, as the chainsaw automatically turns off after a period of inactivity.
Typical A-weighted noise levels (sound pressure and power) for DUC204, DUC254, DUC254C models.
General and specific safety guidelines for operating the power tool and chain saw.
Precautions for battery handling, charging, storage, and proper disposal.
Procedures to test the chain brake and run-down brake for proper function.
When and how to sharpen the saw chain, including sharpening criteria.
Methods for sharpening saw chain, including file use and angles.
Table outlining periodic maintenance checks and their frequency.
Table listing malfunctions, their causes, and recommended actions.
General
