To Next PageTo Next PageWhat to do if the chain of my Makita DUC256 does not stop when the chain brake is activated?
If the chain on your Makita Chainsaw does not stop even when the chain brake is activated, the brake band is likely worn down. Ask the authorized service center in your region for repair.
Why is the Torque Boost mode not available on my Makita DUC256 Chainsaw?
If the Torque Boost mode is not available on your Makita Chainsaw after replacing the battery cartridge, use the tool in the normal mode until the installed battery cartridge becomes empty, and then replace the battery cartridge with a fully charged one, or recharge the battery cartridge.
Why my Makita Chainsaw does not start?
If your Makita Chainsaw doesn't start, it might be due to several reasons. First, ensure a charged battery cartridge is correctly installed. Second, the battery might have low voltage and needs recharging or replacement. Finally, check if the main power switch is turned on, as the chainsaw automatically turns off after a period of inactivity.
Why the saw chain of my Makita DUC256 Chainsaw does not run?
If the saw chain of your Makita Chainsaw does not run, it is possible that the chain brake is activated. In this case, release the chain brake.
What to do if my Makita Chainsaw has abnormal vibration?
If your Makita Chainsaw is vibrating abnormally, it could be due to a loose guide bar or saw chain; adjust the guide bar and saw chain tension to resolve this. If the issue persists, it may indicate a tool malfunction, and you should ask the authorized service center in your region for repair.
Why my Makita Chainsaw does not reach maximum RPM?
If your Makita Chainsaw does not reach maximum RPM, possible causes include: the battery cartridge is installed improperly (install it as described in the manual); the battery power is dropping (recharge or replace the battery); or the drive system is malfunctioning. If the first two aren't the case, you will need to ask the authorized service center in your region for repair.
Why does the motor of my Makita DUC256 Chainsaw stop after a little use?
If the motor of your Makita Chainsaw stops running after a short period, the battery's charge level might be low. Try recharging the battery cartridges, and if that doesn't work, replace the battery cartridge.
What to do if the saw chain does not run on my Makita Cordless Saw?
The saw chain might not run because the chain brake is activated. To resolve this, release the chain brake.
How to troubleshoot a Makita Cordless Saw that does not start?
If your Makita Cordless Saw doesn't start, several factors could be at play. First, ensure a charged battery cartridge is correctly installed. If the battery is low, recharge it or replace it if recharging doesn't help. Also, check if the main power switch is off, as the saw automatically shuts down after inactivity. If so, turn the main power switch on again.
What to do if the saw chain does not run on my Makita DUC256?
If the saw chain of your Makita Chainsaw does not run, it is likely because the chain brake is activated. Release the chain brake to allow the chain to run.
General| Battery Voltage | 18V |
|---|---|
| Guide Bar Length | 25 cm (10") |
| Chain Pitch | 3/8" |
| Battery Type | Li-ion |
| Type | Cordless |
| Chain Speed | 20 m/s |
| Chain Gauge | 1.1 mm (0.043") |
Details on model, voltage, weight, and overall length without the guide bar.
Specifications for guide bar lengths, chain types, sprocket details, and chain speed.
Lists compatible Makita battery cartridges for the tool.
Explains safety symbols and defines the tool's intended applications.
Provides A-weighted noise emission levels for different tool models.
Covers essential safety rules for power tools and specific warnings for chain saw operation.
Details vibration emissions and includes the EC Declaration of Conformity.
Outlines safe operating procedures, kickback avoidance, and pre-use checks.
Specific safety rules related to operating the tool with a battery cartridge.
Recommends necessary protective gear and covers safety for top-handle models.
Provides advice on managing and reducing vibration exposure risks.
Important safety instructions for handling and using battery cartridges.
Advice on charging, storage, and usage to extend battery life.
Identifies tool components and explains battery installation/removal procedures.
Instructions on how to view the remaining battery capacity indicator.
Covers main power switch operation and the tool/battery protection systems.
Explains how to use and the conditions for the Torque Boost mode.
Safe switch operation, testing chain and run-down brakes, and adjusting chain lubrication.
Usage of carabiner, spike bumper, electronic control, and saw chain/guide bar installation.
Details on automatic lubrication, refilling oil, and adjusting chain tension.
General safety, tree pruning techniques, and safe tool transportation.
Instructions on how to sharpen the saw chain and the criteria for correct sharpening.
Procedures for cleaning the guide bar, sprocket cover, and oil discharge hole.
Information on replacing the sprocket and proper methods for storing the tool.
A table outlining recommended maintenance tasks and their frequencies.
Detailed guide to identifying and resolving common tool malfunctions.
Lists recommended optional accessories for the Makita tool.
