To Next PageTo Next PageWhat to do if there is no oil on the chain of Makita DUC256?
If there's no oil on the chain of your Makita Chainsaw, the oil tank might be empty, so fill it up. Another possibility is a dirty oil guide groove, which you should clean. Also, check and adjust the oil delivery with the adjusting screw if the oil delivery is poor.
Why the saw chain cannot be installed on my Makita Chainsaw?
If the saw chain cannot be installed on your Makita Chainsaw, the combination of saw chain and sprocket is not correct. Use the correct combination of saw chain and sprocket by referring to the section for specifications.
What to do if there is no oil on the chain of my Makita DUC256 Chainsaw?
If there is no oil on the chain of your Makita Chainsaw, check the following: First, the oil tank may be empty, so fill it. Second, the oil guide groove may be dirty and needs cleaning. Third, the oil delivery might be poor, so adjust the amount of oil delivery with the adjusting screw.
General| Battery Voltage | 18V |
|---|---|
| Guide Bar Length | 25 cm (10") |
| Chain Pitch | 3/8" |
| Battery Type | Li-ion |
| Type | Cordless |
| Chain Speed | 20 m/s |
| Chain Gauge | 1.1 mm (0.043") |
Details on model, voltage, weight, and overall length without the guide bar.
Specifications for guide bar lengths, chain types, sprocket details, and chain speed.
Lists compatible Makita battery cartridges for the tool.
Explains safety symbols and defines the tool's intended applications.
Provides A-weighted noise emission levels for different tool models.
Covers essential safety rules for power tools and specific warnings for chain saw operation.
Details vibration emissions and includes the EC Declaration of Conformity.
Outlines safe operating procedures, kickback avoidance, and pre-use checks.
Specific safety rules related to operating the tool with a battery cartridge.
Recommends necessary protective gear and covers safety for top-handle models.
Provides advice on managing and reducing vibration exposure risks.
Important safety instructions for handling and using battery cartridges.
Advice on charging, storage, and usage to extend battery life.
Identifies tool components and explains battery installation/removal procedures.
Instructions on how to view the remaining battery capacity indicator.
Covers main power switch operation and the tool/battery protection systems.
Explains how to use and the conditions for the Torque Boost mode.
Safe switch operation, testing chain and run-down brakes, and adjusting chain lubrication.
Usage of carabiner, spike bumper, electronic control, and saw chain/guide bar installation.
Details on automatic lubrication, refilling oil, and adjusting chain tension.
General safety, tree pruning techniques, and safe tool transportation.
Instructions on how to sharpen the saw chain and the criteria for correct sharpening.
Procedures for cleaning the guide bar, sprocket cover, and oil discharge hole.
Information on replacing the sprocket and proper methods for storing the tool.
A table outlining recommended maintenance tasks and their frequencies.
Detailed guide to identifying and resolving common tool malfunctions.
Lists recommended optional accessories for the Makita tool.
