Why the saw chain cannot be installed on my Makita DUC256PG2?
If the saw chain cannot be installed on your Makita Chainsaw, the combination of saw chain and sprocket is not correct. Use the correct combination of saw chain and sprocket by referring to the section for specifications.
What to do if the saw chain does not run on my Makita Chainsaw?
If the saw chain of your Makita Chainsaw does not run, it is likely because the chain brake is activated. Release the chain brake to allow the chain to run.
What to do if there is no oil on the chain of my Makita DUC256PG2 Chainsaw?
If you notice no oil on the chain of your Makita Chainsaw, the oil tank might be empty, so refill it. Another possible reason is a dirty oil guide groove, which requires cleaning. You may also need to adjust the amount of oil delivery with the adjusting screw if the oil delivery is poor.
General| Chain Pitch | 3/8" |
|---|---|
| Vibration Level | 2.5 m/s² |
| Power Source | Battery |
| Bar Length | 25 cm (10") |
| Chain Speed | 0-20 m/s |
| Oil Tank Capacity | 200 ml |
To Next Page
