To Next Page
B
Brenda ColemanSep 6, 2025
What to do if Makita Chainsaw saw chain does not run?
- KKristen HenrySep 6, 2025
If the saw chain on your Makita Chainsaw isn't running, it's possible that the chain brake is activated. Try releasing the chain brake.
What to do if Makita Chainsaw saw chain does not run?
If the saw chain on your Makita Chainsaw isn't running, it's possible that the chain brake is activated. Try releasing the chain brake.
Why is the main power lamp blinking on my Makita DUC400?
The main power lamp on your Makita Chainsaw may be blinking because the switch trigger is pulled under an unoperable condition. Ensure the main power switch is on and the chain brake is released before pulling the switch trigger.
Why does my Makita DUC400 motor stop running quickly?
If the motor of your Makita Chainsaw stops running after only a short period of use, the battery's charge level is likely low. Recharge the battery cartridges, and if recharging isn't effective, consider replacing the battery cartridge.
How to fix a Makita DUC400 Chainsaw that does not reach maximum RPM?
If your Makita Chainsaw isn't reaching its maximum RPM, it could be due to a few reasons. First, ensure that the battery cartridge is installed correctly. If the battery power is dropping, try recharging the battery cartridges or replacing them if recharging is not effective.
What to do if the Makita Chainsaw chain does not run?
If the saw chain on your Makita Chainsaw isn't running, the chain brake might be activated. Try releasing the chain brake.
Why does my Makita Chainsaw not reach maximum RPM?
If your Makita Chainsaw does not reach maximum RPM, it could be due to a few reasons. Ensure the battery cartridges are installed correctly as described in the manual. Also, check if the battery power is dropping and recharge the battery cartridges or replace them if recharging is ineffective.
General| Type | Cordless Chainsaw |
|---|---|
| Chain Pitch | 3/8" |
| Power Source | Battery |
| Battery Type | Lithium-ion |
| Automatic Oiler | Yes |
| Bar Length | 14 inches |
| Chain Speed | 20 m/sec |
| Weight | 4.7 kg |
| Chain Gauge | 1.3 mm |
Illustrations and their meanings used on the equipment.
Defines the primary purpose for which the chain saw is designed.
Essential safety advice for tool operation, covering work area, electrical, and personal safety.
Guidelines for proper handling, maintenance, and storage of power tools.
Instructions for safe and effective use and maintenance of battery packs.
Crucial safety precautions and handling instructions for battery cartridges.
Recommendations to maximize the lifespan and performance of battery cartridges.
Identification and labeling of the various components of the chain saw.
Step-by-step guide for inserting and detaching the battery cartridge.
Explanation of built-in systems that protect the tool and battery from damage.
Instructions for operating the main power switch to turn the tool on and off.
Details on how to operate the switch trigger and lock-off lever for safe use.
Procedure to verify the proper functioning of the chain brake mechanism.
How to adjust the oil feed rate for the saw chain.
Step-by-step guide for disassembling and assembling the saw chain and guide bar.
Instructions for setting the correct tension for the saw chain.
Information on automatic chain lubrication and refilling the oil tank.
Guidance on proper techniques and safety precautions during chain saw operation.
Technique for cutting logs or timber into shorter lengths.
Procedure for removing branches from a felled tree.
Specialized cutting methods for specific wood grain situations.
Instructions and safety for cutting down trees.
Detailed steps and safety measures for felling trees.
Proper methods for safely transporting the chain saw.
Guidelines and criteria for maintaining a sharp saw chain.
How to clean debris from the guide bar groove for optimal performance.
Instructions for removing accumulated dust from the sprocket cover.
Steps to clear blockages in the oil discharge hole for proper lubrication.
Procedure and considerations for replacing a worn sprocket.
Proper steps for cleaning and storing the chain saw when not in use.
Common malfunctions and their solutions for the chain saw.
Recommended attachments and accessories for use with the chain saw.
