To Next PageTo Next PageWhy is there no chain lubrication on my Makita EA4300F?
To address the issue of no chain lubrication in your Makita Chainsaw, fill the oil tank, clean the oil guide groove, and adjust the oil pump. This problem can be caused by an empty oil tank, a dirty oil guide groove, or an incorrectly adjusted oil pump adjusting screw.
Why does my Makita EA4300F lack power?
Your Makita Chainsaw might have insufficient power due to a dirty air filter, incorrect carburetor adjustment, a clogged muffler, a clogged exhaust channel in the cylinder, or a clogged spark arrester screen. To fix this, clean or replace the air filter, adjust the carburetor, and inspect the exhaust system.
What to do if my Makita EA4300F Chainsaw has warm start difficulties?
If you're experiencing warm start difficulties with your Makita Chainsaw, it might be due to an incorrect carburetor adjustment. Adjust the carburetor to resolve this issue.
How to fix no chain lubrication on a Makita EA4300F Chainsaw?
If your Makita Chainsaw isn't lubricating the chain, the oil tank might be empty, the oil guide groove could be dirty, or the oil-pump adjusting screw might be incorrectly adjusted. Fill the oil tank, clean the oil guide groove, and adjust the oil-pump to resolve this.
What to do if the chain does not run on my Makita EA4300F Chainsaw?
If the chain on your Makita Chainsaw isn't running, the chain brake may be actuated. Check the chain brake.
General| Engine Displacement | 42.4 cc |
|---|---|
| Weight | 4.9 kg |
| Bar Length | 40 cm (16") |
| Fuel Tank Capacity | 0.48 L |
| Oil Tank Capacity | 0.28 L |
| Chain Pitch | 3/8 in |
| Chain Gauge | 0.050" |
| Power Output | 2.2 kW |
