To Next PageTo Next Page
Need help?Do you have a question about the Makita HP1641 HP1641K and is the answer not in the manual?
General| Type | Hammer Drill |
|---|---|
| Voltage | 240 V |
| Power | 680 W |
| No Load Speed | 0 - 2800 rpm |
| Drilling Capacity (Wood) | 30 mm |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Capacity (Masonry) | 16 mm |
| Input Wattage | 680 W |
| Power Source | Corded Electric |
| Impact Rate | 0-44800 bpm |
| Chuck Capacity | 13 mm |
| Chuck Size | 13mm |
Safety precautions for maintaining a clean and safe work environment.
Guidelines for safe use of electrical power tools and preventing shock.
Maintaining alertness and common sense for personal safety during tool operation.
Covers proper usage, maintenance, and storage of power tools.
Guidelines for professional servicing, lubrication, and keeping handles clean.
Precautions for noise exposure and using auxiliary handles during hammer drilling.
Explains the operation of the power tool's trigger and lock button.
Details how to use the switch to change the tool's rotation direction.
How to change the tool's operating mode (hammering or rotation only).
Instructions for attaching the auxiliary side grip for better control and safety.
Steps for inserting and removing drill bits using the chuck key or sleeve.
How to use the depth gauge for consistent drilling depth.
Guidance on performing hammer drilling effectively and safely.
Tips for drilling into wood materials.
Guidance on drilling into metal, including lubrication and securing workpieces.
Procedures for maintaining the tool, avoiding solvents, and professional servicing.
Details recommended accessories for the tool.
Outlines the terms and conditions of the one-year limited warranty.
