Need help?Do you have a question about the Makita HP1630 and is the answer not in the manual?
General| Chuck type | - |
|---|---|
| Adjustable speed | Yes |
| Idle speed (max) | 48000 RPM |
| Screw diameter (max) | 30 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in concrete (max) | 16 mm |
| Input power | 710 W |
| Power source | AC |
Weight and Dimensions| Weight | 2100 g |
|---|
Explanation of symbols used on the equipment for user understanding.
Details the recommended applications for the hammer drill, including materials like brick, concrete, stone, wood, metal, ceramic, and plastic.
Information on connecting the tool to a power source, emphasizing voltage compatibility and double insulation.
Guidelines for maintaining a safe work environment, including lighting, avoiding explosive atmospheres, and keeping bystanders clear.
Precautions related to electrical connections, grounding, avoiding wet conditions, and cord care to prevent shock.
Advice on staying alert, using protective equipment, preventing unintentional starts, and dressing appropriately.
Instructions on proper tool operation, maintenance, and handling to ensure safety and longevity.
Details on how to start, stop, and lock the switch trigger for continuous operation.
Explanation of how to change the drill's rotation direction using the reversing switch lever.
Instructions on how to switch between hammering and rotation-only modes using the action mode change lever.
Steps for attaching and positioning the auxiliary side grip for better control and safety.
Procedure for inserting and removing drill bits using the chuck key or by hand.
How to install and adjust the depth gauge for drilling holes of uniform depth.
Guidance on performing hammer drilling, emphasizing the use of the side grip and proper holding techniques.
Techniques for drilling in wood, recommending specific drill bits and lubricants for optimal results.
Methods for drilling in metal, including center-punching and the use of cutting lubricants.
To Next Page
