To Next PageTo Next Page
Need help?Do you have a question about the Makita HP1631K and is the answer not in the manual?
Details drilling capacities for concrete, steel, and wood for HP1630 and HP1631 models.
Lists no load speed, blows per minute, overall length, and net weight for the tool models.
Provides specific safety precautions for operating hammer drills, including personal protection and tool handling.
Explains how to operate the switch trigger, including starting, stopping, and locking the tool.
Describes how to use the reversing switch to change the direction of rotation.
Explains how to switch between rotation with hammering and rotation-only modes.
Guides on performing hammer drilling in materials like concrete, emphasizing grip and pressure.
Details on drilling in wood, metal, and plastic, including techniques for starting holes and using lubricants.
Lists recommended accessories for the tool and advises on their proper use.
Provides typical noise and vibration emission values according to EN60745 standards.
General| Chuck type | Keyless |
|---|---|
| Adjustable speed | Yes |
| Idle speed (max) | 3200 RPM |
| Drilling diameter in wood (max) | 30 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in stone (max) | 16 mm |
| Type | Drill |
| Depth | 204 mm |
| Width | 296 mm |
| Weight | 1900 g |
| Input power | 710 W |
| Cable length | 2 m |
| AC input voltage | 110 - 240 V |
| Power source | AC |
