Makita HR4511C User Manual

8
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• SDS-Max Carbide-tipped bits
• SDS-Max bull point
• SDS-MAX cold chisel
• SDS-MAX scaling chisel
• SDS-MAX tile chisel
• SDS-MAX clay spade
• Hammer grease
• Bit grease
• Side handle
• Side grip
• Depth gauge
• Blow-out bulb
• Safety goggles
• Carrying case
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
Noise
ENG905-1
The typical A-weighted noise level determined according
to EN60745:
Model HR4501C, HR4511C
Sound pressure level (L
pA
): 94 dB (A)
Sound power level (L
WA
): 105 dB (A)
Uncertainty (K): 3 dB (A)
Model HR4510C
Sound pressure level (L
pA
): 93 dB (A)
Sound power level (L
WA
): 104 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
ENG900-1
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model HR4501C
Work mode: hammer drilling into concrete
Vibration emission (a
h,HD
): 16.0 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode: chiselling
Vibration emission (a
h,CHeq
): 12.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode: chiselling function with side grip
Vibration emission (a
h,CHeq
): 12.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Model HR4510C
Work mode: hammer drilling into concrete
Vibration emission (a
h,HD
): 9.5 m/s
2
Uncertainty (K): 2.0 m/s
2
Work mode: chiselling
Vibration emission (a
h,CHeq
): 8.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode: chiselling function with side grip
Vibration emission (a
h,CHeq
): 8.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Model HR4511C
Work mode: hammer drilling into concrete
Vibration emission (a
h,HD
): 7.5 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode: chiselling
Vibration emission (a
h,CHeq
): 7.0 m/s
2
Uncertainty (K): 1.5 m/s
2
Work mode: chiselling function with side grip
Vibration emission (a
h,CHeq
): 7.5 m/s
2
Uncertainty (K): 1.5 m/s
2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
For European countries only
ENH101-16
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Rotary Hammer
Model No./Type: HR4501C, HR4510C, HR4511C
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30. 1. 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN

Makita HR4511C Specifications

General

Input power	1350 W
Power source	AC
Impact rate	2750 bpm
Rated speed (max)	280 RPM
Impact energy (max)	9.4 J
Drilling diameter in wood (max)	125 mm
Drilling diameter in concrete (max)	45 mm
Weight (including battery)	8400 g

Weight and Dimensions

Depth	36 mm
Width	458 mm
Height	288 mm