JS1300
SPECIFICATIONS
Model JS1300
Max. cutting capacities
Steel up to 400 N/mm
2
........................................................................................................................ 1.3 mm
Steel up to 600 N/mm
2
........................................................................................................................ 1.0 mm
Steel up to 800 N/mm
2
........................................................................................................................ 0.5 mm
Aluminium up to 200 N/mm
2
............................................................................................................... 2.5 mm
Strokes per minute ............................................................................................................................. 0 – 2,500
Overall length ....................................................................................................................................... 302 mm
Net weight ................................................................................................................................................ 1.7 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets without earth wire.
Straight Shear
JS1300 (g-Cover) (’100. 9. 28)
To Next Page
Need help?
General
