To Next PageTo Next Page
Need help?Do you have a question about the Makita JV2000 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Variable Speed Control | Yes |
| Type | Jigsaw |
| Dust Nozzle | Yes |
| Cutting Capacity (steel at 90°) | 3/8 inch |
| Orbital Settings | 3 |
How to start, stop, and adjust the speed of the jig saw using the switch lever.
Understanding the difference between orbital and straight cutting actions for various materials.
Steps for turning on the tool and moving it along the marked cutting line.
Technique for starting cuts without an edge by tilting the tool.
Procedure to perform flush cuts by adjusting the base and roller.
Instructions on how to set up and perform bevel cuts at various angles.
Methods for trimming edges and improving cut surface finish.
Attaching and using the guide rule for straight and repetitive cuts.
How to use the circular guide for cutting circles and arcs accurately.
Essential advice for cutting metal, including coolant usage and blade care.
Step-by-step guide for replacing worn carbon brushes to maintain tool performance.
Explanation of Makita's limited one-year warranty terms, coverage, and limitations.
