2.
When attaching the circular guide, use
the pin, inserting
it
in the center hole
(arrow) and secure
it
with the threaded
knob. The circular guide attaches to the
base
of
the tool in the same manner
as
the guide rule (rip fence).
Metal
cutting
Always use
a
suitable coolant (cutting oil)
when cutting metal. Failure to do
so
will
cause significant blade wear.
The underside of the workpiece can be
greased instead of using
a
coolant. (Fig.
17).
Pic
for
circular
gulde
Fig.
15
Fig.
16
Fig.
17
10
To Next Page
Loading...
Need help?
General
