21.
Be alert at all times, especially during repetitive, monotonous operations.
Don't be lulled into a false sense of security. Blades are extremely unforgiving.
22.
Turn off tool and wait for saw blade to stop before moving workpiece or
changing settings.
23. Always use accessories recommended
in
this manual. Use of improper
accessories such as abrasive wheels may cause an injury.
24. Don't abuse cord. Never yank cord
to
disconnect
it
from the receptacle. Keep
cord away from heat, oil, water and sharp edges.
25. Never attempt to cut workpieces less than
14
Gauge
(0.08")
thick except
pipe or workpieces which cannot be secured firmly with the vise. The piece
cut off may be caught by the blade, causing dangerous scattering of chips
and/or damage to the carbide-tips. Possible serious injury may result.
.
26. Unplug tool before changing blade or servicing.
SAVE THESE INSTRUCTIONS.
6
To Next Page
Loading...
