Socket
wrench
The socket wrench is stored on the left
side
of
the tool base. When using the
socket wrench, pull it out
of
the wrench
holder. After using the socket wrench,
return it to the wrench holder.
Positioning the
tool
When the tool is shipped from the factory,
the handle is locked in the lowered posi-
tion. Release the handle from the lowered
position by lowering is slightly and remov-
ing the chain from the hook on the handle.
Bolt the tool with two bolts to
a
level and
stable surface using the bolt holes provided
in the
tool
base. This will help prevent tip-
ping and possible injury.
Bolt
-
U
7
To Next Page
Loading...
