Need help?Do you have a question about the Makita LF1000 and is the answer not in the manual?
General| Input power | 1650 W |
|---|---|
| Power source | AC |
| Blade bore | 30 mm |
| Blade diameter | 260 mm |
| Saw blade included | Yes |
| Idle speed (max) | 2700 RPM |
| Cutting capacity 45° miter | 150 x 140 mm |
Weight and Dimensions| Depth | 660 mm |
|---|---|
| Width | 650 mm |
| Height | 1220 mm |
| Weight | 34000 g |
Covers maintaining a safe work environment and precautions for electrical safety during use.
Outlines essential personal protective measures and common sense practices for operator safety.
Safety advice to follow before performing any assembly or maintenance tasks.
Guidance on storing the hex wrench for convenience and safety.
How to ensure the rip fence is parallel to the blade for safe and accurate cuts.
Instructions on securing the turn table, tool head, and limit stopper.
How to secure the tool head in its lowest position for specific operations.
Guidance on installing and removing blade guards for safe operation.
Detailed instructions for performing cuts in miter saw mode safely and effectively.
Safety and operational advice for performing cuts in table saw mode.
Guidance on using push blocks and auxiliary fences for enhanced safety and control.
How to attach an auxiliary board to the miter gauge for improved workpiece stability.
Instructions for safe carrying and basic maintenance procedures.
Specific steps for fine-tuning the bevel angle settings on the tool.
To Next Page
