Makita LS1030 Technical Information

Change on slide plate and base
44192
T
ECHNICAL INFORMATION
Subject
For Models
Description
1. The slide plates will be changed from 0.3 mm (0.0012" )
to 0.5 mm (0.002" ) in thickness and 3.8 mm (5/32" ) to 6.0
mm (15/64" ) in width.
2. The rubber pins will be discontinued.
3. The slide plate installing portion of the base will be lowered. So the dimension (A) will be changed from 20.2 mm (0.795" )
to 20.4 mm (0.803" ). The current type base and the new type base are interchangeable.
LS1030 (Miter Saw)
Slide plate installing portion of base
Rubber pin 4
Slide plate
Base
3.8 mm (5/32" ) 6.0 mm (15/64" )
0.3 mm (0.0012" ) 0.5 mm (0.002" )
Dimension (A): 20.2 mm (0.795" )
20.4 mm ((0.803" )
Top surface of base

Makita LS1030 Specifications

General

Power Source	Corded
Amperage	15 A
No Load Speed	4, 600 RPM
Power Input	1, 650 W
Voltage	120 V
Blade Diameter	10 inch
Bevel Range	45° L