Need help?Do you have a question about the Makita M583 and is the answer not in the manual?
General| Power Source | Corded |
|---|---|
| Voltage | 220-240 V |
| Blade Diameter | 190 mm |
| Max Cutting Capacity at 0°/90° | 66 mm |
| Input Power | 1050 W |
| No Load Speed | 4, 900 rpm |
| Power Supply Cord | 2.5 m |
Ensure proper plugs, avoid earthed surfaces, protect from wet conditions, handle cords with care, and use outdoor extension cords.
Stay alert, use common sense, and do not operate while tired or under the influence of drugs or alcohol.
Keep hands away from blade, don't reach underneath, set depth correctly, secure workpiece, never hold by hand.
Maintain firm grip, handle binding properly, support panels, use sharp blades, check adjustments, use caution in blind areas.
Check lower guard closing before each use. Never clamp or tie the lower guard into the open position.
Do not stop blade by lateral pressure, avoid cutting nails, place base correctly, do not hold short pieces by hand, do not saw upside down.
To Next Page
