Need help?Do you have a question about the Makita PJ7000 and is the answer not in the manual?
General| No Load Speed | 11, 000 RPM |
|---|---|
| Power Source | Corded |
| Blade Diameter | 100 mm |
| Cutting Depth | 20 mm |
| Weight | 2.5 kg |
| Dimensions | 302 x 139 x 145 mm |
| Cord Length | 2.5 m |
| Net Weight | 2.5 kg |
| Arbor | 22 mm |
Displays icons used on the equipment and explains their meanings for proper understanding.
Defines the tool's purpose: cutting crescent-shaped slots for flat wooden dowels or biscuits via plunging.
Details voltage requirements, AC supply type, and double insulation for safe operation.
Emphasizes keeping the work area clean, well-lit, and free from distractions to prevent accidents.
Covers precautions for power plugs, grounding, avoiding wet conditions, and cord management.
Focuses on operator alertness, use of personal protective equipment, and preventing accidental starts.
Provides guidelines for proper tool operation, maintenance, keeping tools sharp, and storing them safely.
Explains how to preset and fine-tune the grooving depth using the stopper, adjusting screw, and table.
Details adjusting the angle guide height to position the blade relative to the workpiece thickness.
Describes how to adjust the fence angle for different joints, with stops at 0°, 45°, and 90°.
Instructions for operating the slide switch, including starting, stopping, and locking the tool.
Step-by-step guide for blade removal and installation, including necessary cautions and tools.
Outlines the process for preparing workpieces and making various types of joints with the plate joiner.
To Next Page
