TECHNICAL DATA RBC2500, RBC2510
Model
RBC2500 RBC2510
U handle Loop handle
Dimensions : length x width x height (without cutting blade) mm 1,770 x 620 x 410 1,770 x 340 x 220
Mass (without plastic guard and cutting blade) kg 4.5 4.4
Volume (fuel tank) L 0.5
Engine displacement cc 24.5
Maximum engine performance HP 1.0 at 7,000/min
Engine speed at recommended max. spindle speed /min 8,800
Maximum spindle speed (corresponding) /min 6,000
Maximum fuel consumption kg/h —
Maximum specific fuel consumption g/HPh —
Idling speed /min 2,600
Clutch engagement speed /min 3,600
Carburetor type WALBRO WYJ
Ignition system type Solid state ignition
Spark plug type NGK BM7A
Electrode gap mm 0.6 – 0.7
Fuel
Mixed gas
(gasoline: Makita Genuine Two-stroke Engine Oil =50:1)
Gear ratio 14/19
7
To Next Page
Loading...
