Easy-to-Customize
Convenient Tool Bag (option)
Standardized intervals between base plate setting screws enable to
use various Base plates for a wide range of applications.
Square-shaped tool bag with
standardized size of inner tray enables to
put various items into the bag such as
Guide rail adapter set, Router bit set,
Motor unit, Base assemblies, etc.
Trimmer
RT0700C
6mm (1/4”), 8mm (3/8”)
Continuous rating Input
Capacity
No load speed (rpm)
Dimensions (L x W x H)
Net Weight*
Power supply cord
710W
Collet : 6mm, 8mm or 1/4”, 3/8"
10,000-30,000
89x89x200mm (3-1/2"x3-1/2"x7-7/8")
1.8kg (3.9lbs)
2.5m (8.2ft)
Items of standard equipment and specications may vary by country or area.
*weight according to EPTA-Procedure 01/2003
411
4 Dierent Base Assemblies
for Added Versatility
Trimmer base
Plunge base (Option)
Oset base (Option)
Tilt base (Option)
Standard Equipment :
Trimmer Base Assembly, Straight Guide, Collet Cone (2pcs), Wrench (2pcs)
Double Insulation
Variable Speed
Constant Speed
Soft Start
Convenient for cutting workpiece
using guide rule, auxiliary wood
fence
Trimmer base assembly
with Square base plate
Oset base plate with
Grip of Plunge base assembly
Plunge base assembly
with Side grip
Convenient for cutting wide
workpiece
Convenient for cutting while
applying weight on one of the two
handles of the base
Grip
Part No. 153489-2
125
100
Makita RT0700C
Competitor "B"
90
Competitor "P"
110
Competitor "R"
0 10050 150
Fast
Slow
Performance Comparison
Note:
1) The test results depend to a great extent on the hardness of materials, etc.
2) The numbers in the bar chart below is relative values when the capacities of Competitor B is
indexed at 100.
Cut a 1,000mm long groove in Taun at a depth of 6mm using 6mm straight bit.
Motor unit with Trimmer base assembly
Work Speed
Dust Collecting
Satisfy Professional's Needs
Trimmer
RT0700C
PRINTED IN JAPAN BB-BC
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan
To Next Page
Need help?
General
