To Next PageTo Next Page
Need help?Do you have a question about the Makita RT0702CX2J and is the answer not in the manual?
General| Power | 710W |
|---|---|
| Variable Speed | Yes |
| Base Types | Plunge, Tilt, Offset |
| Power Source | Corded Electric |
| Input Power | 710W |
| No Load Speed | 10, 000 - 30, 000 RPM |
| Plunge Capacity (Trimmer) | 35 mm |
| Voltage | 230V |
| Collet Capacity | 6 mm, 1/4" |
| Collet Size | 6 mm, 1/4" |
Mandatory safety measure to wear ear protection due to noise emissions.
Read all safety warnings, instructions, and specifications. Failure may result in injury.
Check and replace carbon brushes when worn to the limit mark for continued safe operation.
