To Next PageTo Next Page
Need help?Do you have a question about the Makita RT0700CX3J and is the answer not in the manual?
General| Power Input | 710W |
|---|---|
| No Load Speed | 10, 000 - 30, 000 RPM |
| Weight | 1.8 kg |
| Power Source | Corded |
| Voltage | 240V |
| Length | 200 mm |
| Collet Capacity | 6 mm |
| Plunge Capacity | 0 - 35 mm |
| Dimensions | 89 mm x 89 mm x 200 mm |
Specific safety precautions for operating the trimmer.
How to adjust the bit's depth relative to the base.
Explanation of how to operate the tool's on/off switch.
Details on the tool's electronic features like constant speed and soft start.
How to adjust the tool's speed using the dial.
Instructions for using the tool with the trimmer base attachment.
Using templet, straight, and trimmer guides for various cuts.
Performing circular cuts and using the tilt base accessory.
Using the offset base in tight areas.
Using offset base with trimmer base and grip for stability.
How to set the cutting depth when using the plunge base.
Using the straight guide with the plunge base for router operations.
How to inspect and replace the tool's carbon brushes.
Specific information for European countries regarding conformity.
