13 ENGLISH
-
The term "power tool" in the warnings refers to your
1.
Cutting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2.
3.
4.
6.
7.
8.
10.
11.
12.
13.
14.
16.
-
17. -
18.
20. Otherwise falling
SAVE THESE INSTRUCTIONS.
WARNING:
-
-
FUNCTIONAL
DESCRIPTION
CAUTION:
1.2. Scale 3.4.
lever 5.6. Hex nut
When the tool is not secured even if the lock-
ing lever is closed, tighten the hex nut and then close
the locking lever.
CAUTION:
To start the tool, press the I side of the switch. To stop
the tool, press the O side of the switch.
1. Switch
The tool is equipped with the electronic functions for
easy operation.
1. Indication lamp
The indication lamp lights up green when the tool is
plugged. If the indication lamp does not light up, the
-
out, or the controller, the motor or the ON/OFF switch
The tool does not start with the I side of the switch
pressed even when the tool is plugged.
the unintentional restart proof device is on function.
To cancel the unintentional restart proof, press the O
side of the switch.
Soft-start feature minimizes start-up shock, and makes
the tool start smoothly.
kept constant even under the loaded condition.