Makita TM30D - Product Specifications and Usage; Technical Specifications; Intended Use of the Tool

2 ENGLISH
SPECIFICATIONS
Model: TM30D
Oscillation per minute 6,000 - 20,000 min
-1
Oscillation angle, left/right 1.6° (3.2° total)
Rated voltage D.C. 10.8 V - 12 V max
Battery cartridge BL1016, BL1021B BL1041B
Overall length 277 mm 296 mm
Net weight without dust extraction
attachment
1.1 kg 1.2 kg
with dust extraction
attachment
1.2 kg 1.3 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003
Symbols
Thefollowingshowthesymbolsusedfortheequip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wearsafetyglasses.
OnlyforEUcountries
Donotdisposeofelectricequipment
together with household waste material! In
observanceoftheEuropeanDirective,on
WasteElectricandElectronicEquipment
and its implementation in accordance with
nationallaw,electricequipmentthathave
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
Thetoolisintendedforsawingandcuttingwood,
plastic, gypsum, non-ferrous metals, and fastening
elements (e. g. unhardened nails and staples). It is also
intended for working soft wall tiles, as well as dry sand-
ing and scraping of small surfaces. It is especially for
workingclosetoedgeandushcutting.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN60745:
Workmode:Sanding
Soundpressurelevel(L
pA
):75dB(A)
Uncertainty(K):3dB(A)
Thenoiselevelunderworkingmayexceed80dB(A).
Workmode:Cuttingwithplungecutsawblade
Soundpressurelevel(L
pA
):82dB(A)
Soundpowerlevel(L
WA
):93dB(A)
Uncertainty(K):3dB(A)
Workmode:Cuttingwithsegmentalsawblade
Soundpressurelevel(L
pA
):81dB(A)
Soundpowerlevel(L
WA
):92dB(A)
Uncertainty(K):3dB(A)
Workmode:Scraping
Soundpressurelevel(L
pA
):81dB(A)
Soundpowerlevel(L
WA
):92dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
minedaccordingtoEN60745:
Workmode:Sanding
Vibration emission (a
h
):2.5m/s
2
or less
Uncertainty(K):1.5m/s
2
Workmode:Cuttingwithplungecutsawblade
Vibration emission (a
h
):10.5m/s
2
Uncertainty(K):1.5m/s
2
Workmode:Cuttingwithsegmentalsawblade
Vibration emission (a
h
):5.5m/s
2
Uncertainty(K):1.5m/s
2
Workmode:Scraping
Vibration emission (a
h
):9.0m/s
2
Uncertainty(K):1.5m/s
2
NOTE:Thedeclaredvibrationemissionvaluehas
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:Thedeclaredvibrationemissionvalue
may also be used in a preliminary assessment of
exposure.
WARNING:Thevibrationemissionduringactual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).