Why my Makita UC100DWA Saw does not start?
If your Makita Saw isn't starting, make sure a charged battery cartridge is correctly installed. Also, the battery might be low or faulty. Try recharging it, and if that doesn't work, replace the battery cartridge.
Why does my Makita Saw motor stop after a short use?
If your Makita Saw motor stops shortly after starting, it's likely due to a low battery. Try recharging the battery cartridge. If the problem persists, consider replacing the battery cartridge.
What to do if Makita Saw has abnormal vibration?
If you notice abnormal vibration in your Makita Saw, stop using it immediately! Check if the guide bar or saw chain is loose and adjust the tension. If the issue persists, the tool may be malfunctioning.
What to do if there is no oil on the chain of my Makita Saw?
If there's no oil on the chain of your Makita Saw, the oil tank is probably empty. Refill it. Also, the oil guide groove might be dirty, so clean it.
To Next Page
General
