To Next Page

To Previous Page

11 ENGLISH

3. Adjustthethreepinssothattheyarelinedupon

the alignment line.

►1.Alignmentline

4. Applyasmallamountofgreasetotheperiphery

ofthecrank.Attachthecranktothepinswiththesmall

and large rounds facing up.

►1. Crank

5. Adjustthebladesandbaseplatesothatthehole

in the base plate and the two protrusions on the blades

are lined up.

6. Turntheshearbladesupsidedownandinstall

themsothatthepinsonthetooltintheholeonthe

baseplate.Makesurethattheshearbladesarexed

securely in place.

7. Placetheundercoversothat on the under-

cover is aligned with on the lock lever.

8. While pressing the undercover, turn the under-

cover clockwise until on the undercover is aligned

with on the lock lever.

Makita UM600D User Manual

Questions and Answers: