Makita XSL03 User Manual

2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: XSL03 XSL04 XSL06
Blade diameter 255 mm (10″)
Hole diameter 15.88 mm (5/8″)
Max. kerf thickness of the saw blade 3.2 mm (1/8″)
Max. miter angle Right 60°, Left 60°
Max. bevel angle Right 48°, Left 48°
No load speed (RPM) 4,400 /min
Laser type - Wavelength 655 nm, Maximum output
1mW (Laser Class II)
Rated voltage D.C. 36 V
Battery cartridge
BL1815N, BL1820B, BL1830, BL1830B, BL1840B, BL1850B, BL1860B
Charger DC18RC, DC18RD, DC18RE, DC18SD, DC18SE, DC18SF
Dimensions (L x W x H) 805 mm x 644 mm x 660 mm
(31-3/4" x 25-3/8" x 26")
Net weight 26.6 - 27.3 kg
(58.6 - 60.2 lbs)
Cutting capacities (H x W)
Miter angle Bevel angle
45° (left) 0° 45° (right)
0° 47 mm x 305 mm
(1-7/8″ x 12″)
61 mm x 279 mm
(2-3/8″ x 11″)
71 mm x 305 mm
(2-13/16″ x 12″)
91 mm x 279 mm
(3-5/8″ x 11″)
29 mm x 305 mm
(1-1/8″ x 12″)
43 mm x 279 mm
(1-11/16″ x 11″)
45° (right and left) 47 mm x 215 mm
(1-7/8″ x 8-1/2″)
61 mm x 197 mm
(2-3/8″ x 7-3/4″)
71 mm x 215 mm
(2-13/16″ x 8-1/2″)
91 mm x 197 mm
(3-5/8″ x 7-3/4″)
29 mm x 215 mm
(1-1/8″ x 8-1/2″)
43 mm x 197 mm
(1-11/16″ x 7-3/4″)
60° (right and left) - 71 mm x 152 mm
(2-13/16″ x 6″)
91 mm x 139 mm
(3-5/8″ x 5-1/2″)
-
Cutting capacities for special cuttings
Type of cutting Cutting capacity
Crown molding 45° type
(with crown molding stopper used)
168 mm
(6-5/8″)
Base board
(with horizontal vise used)
133 mm
(5-1/4″)
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Makita XSL03 Specifications

General

Brand	Makita
Model	XSL03
Category	Saw
Language	English