MALA CX - 8 File Manager

www.malags.com
28
8 File Manager
__________________________________________________
As a profile measurement is started (2D Project) the data is automatically
saved and named as in the following files:
- 2D_0001.rd3 - data (traces)
- 2D _0001.rad - header (measurement info)
- 2D_0001.cor – coordinates if a GPS I connected to the system
- 2D _0001.em - EM data (if using antennas with EM option)
During a 3D Project the following data file is created:
- 3D_0001.rhd - a file directory containing all files measured (in two
directions _1 and _2, in the 3D Project called 1. File extension
follows the above mentioned; however EM data files are named
3D_001_1.emm or _2). Deleting/moving a 3D project removes all
files belonging to the project.
- 3D_001_S0001 – a file directory containing images slices.
The Object-Mapper Projects will result in the following files:
- OBM_0001.obm - a file directory containing all files measured.
Deleting/moving an Object-Mapper project removes all files
belonging to the project.
- OBM_0001_P01.rd3 and .rad – the single files in the OBM_0001
project.
Other files:
- (Project name)_0001.jpeg or png, bmp, tga and tif – an image file of
a selected view. If several images are saved the file names will be
G001_002 and so on. G001 refers to the Grid Project they belong to.
.