Malekko VOLTAGE BLOCK - Creating Your First Sequences

MALEKKOHEAVYINDUSTRY.COM
OVERVIEW 1
OUTPUTS 1-8: 0-5VCV output
channels with LED indicators.
CLOCK IN: External CLOCK
INPUT.
CLOCK/CV/SLAVE: Switch
between different interpolation
modes. CLOCK, CV or SLAVE
(SLAVE for Varigate 8+ connected
to the same bus).
RESET/HOLD: Gate input for
RESET while in CLOCK mode
and HOLD if Voltage Block is set
to CV interpolation mode.
SLIDERS: Control CV pitch
amount per channel and live
recording/automation. Also used
to change the SCALE of a given
channel.
STEP LED Indicators and other
functions.
STEP BUTTONS: Select to
access various parameters for
each step or the 8 available
sequencer outputs including
SHIFT + CLEAR, SMOOTH,
RANDOM, FREEZE, FORWARD,
REVERSE, PENDULUM AND
RANDOM SEQUENCE.
PG. 4
VOLTAGE BLOCK MANUAL V.1