Malmbergs WiFi EVC - Troubleshooting; Indicator Status

34
5 TROUBLESHOOTING
5.1 Indicator Status
State Description LED Status
In standby Normal Flashing green, 1S on, 4S off
Charging status Normal Pulsating green, 1S on, 1S off
Plugged gun state Normal Pulsating yellow, 1S on, 1S off
Software upgrade Normal Green light ash
Ground warning Normal Flashing yellow, 2S on, 2S off
Relay adhesion Fault Red light normally on
Input polarity reverse Fault
Flashing red, 500ms on, 500ms off,
1 time, 3S off, Cycle
CP fault Fault
Flashing red, 500ms on, 500ms off,
2 times, 3S off, Cycle
Leakage current fault Fault
Flashing red, 500ms on, 500ms off,
3 times, 3S off, Cycle
Input terminal over-
temperature
Fault
Flashing red, 500ms on, 500ms off,
4 times, 3S off, Cycle
Relay overtemperature Fault
Flashing red, 500ms on, 500ms off,
5 times, 3S off, Cycle
Under voltage fault Fault
Flashing red, 500ms on, 500ms off,
6 times, 3S off, Cycle
Over voltage fault Fault
Flashing red, 500ms on, 500ms off,
7 times, 3S off, Cycle
Overload fault Fault
Flashing red, 500ms on, 500ms off,
8 times, 3S off, Cycle
Over frequency fault Fault
Flashing red, 500ms on, 500ms off,
9 times, 3S off, Cycle
Owe frequency fault Fault
Flashing red, 500ms on, 500ms off,
10 times, 3S off, Cycle
Leakage current loop
abnormal
Fault
Flashing red, 500ms on, 500ms off,
11 times, 3S off, Cycle