Malmbergs WiFi EVC - Main Function Fast Guide; Add RFID Card; Delete RFID Card

9
Deleting card
Note: The ID is the
8 characters on
the front side of
the card.
Main Function Fast Guide
1. Adding card (RFID)
The two enclosed RFID cards work together with the charger without being added to
the APP. You only need to add the RFID cards to the APP if you want to dedicate to
a certain user or if you need to add additional RFID cards.
Note: It can take up to 5 seconds before the EV charger starts when using RFID.
This depends on how strong the WiFi signal is.