Operator Manual –PROCUT 3000 MP
17
10. MALONE LIMITED WARRANTY
Malone Ballyglass, Claremorris,Co. Mayo, Ireland (hereinafter called “the company”)
warrants to the original retail purchaser that new products sold and registered with the
company, shall be, at the time of delivery, free from defects in material and workmanship,
and that such equipment is covered under Limited Warranty providing the machine is used
and serviced in accordance with the recommendations in the Operator’s manual. This
Limited Warranty covers the equipment for a period of one year starting from the date the
equipment is commissioned.
The email or post submission of the pre-delivery inspection (PDI) form by the dealer
(importer) is taken as evidence of the delivery of the machine to the original retail purchaser.
This is compulsory, and is required to record the machine in the Malone warranty system.
These conditions are subject to the following exceptions:
Parts of the machine which are not of Malone manufacture, such as blades,
PTO shafts, slip clutches, hydraulic cylinders, etc. are not covered by this Limited
Warranty, but are subject to the warranty of the original manufacturer. Warranty
claims applying to these types of parts must be submitted in the same way as if they
were parts manufactured by Malone. However, compensation will be paid in
accordance with the warranty agreement of the manufacturer concerned.
This Limited Warranty does not apply to failure through normal wear and tear,
to damage resulting from negligence or from lack of inspection, from misuse, from
lack of maintenance and/or if the machine has been involved in an accident, lent out
or used for purposes other than those for which it was intended by the company.
This Limited Warranty will not apply to any product that has been altered or
modified in any way without the express permission of the company, or if parts not
approved by Malone are used in repair.
The company take no responsibility for any additional costs, including loss of
oil and/ or consumables incurred during the failure and repair of a product
The company cannot be held responsible for any claims or injuries to the
owner or to the third party, nor to any resulting responsibility.
Also, on no account can the company be held liable for incidental or
consequential damages (including loss of anticipated profits) or for any impairment
due to failure, a latent defect or a breakdown of a machine.
The customer will be responsible for the following costs:
Normal maintenance such as greasing, maintenance of oil levels, minor
adjustments, etc. as specified in the Operator’s manual.
Labour charges other than originally agreed, incurred in the removal and
replacement of components.
Dealer’s travel time and travel costs to and from the machine.
Parts defined as normal wear items such as, but not limited to PTO shafts, chains, tyres,
bearings, tines, slip clutches, etc. that are not covered under the Limited Warranty.
To Next Page
Loading...