Malossi FORCE MASTER 2.1 - Technical Specifications; Base Fuel Curve Configuration

32
ITALIANOENGLISH
32
ITALIANOENGLISH
If errors are present, the Diag LED
will lash. It will then be necessary to
interrogate the control unit by going
to the speciic function to ind out
the error.
Technical details
• Carburation adjusting
• ± 14% al LOW / HIGH / MID
• RPM limiter : +11,100 RPM
• 1 map
• Temperature range = -30°C +80°C
• Minimum operating voltage = +7V
• Maximum operating voltage = +16V
• Average current consumption
<-200mA
• Environmental protection = IP65
Maps
The Force Master 2.1 CDI is
programmed with 1 base fuel curve:
• curve 0: original exhaust system,
Malossi cylinder, original head,
original camshaft and original ilter.