Malossi FORCE MASTER 2.1 - Assembly Instructions; Control Unit and CDI Setup; Control Unit Wiring Details

19
ITALIANOENGLISH
19
ITALIANOENGLISH
FORCE MASTER 2.1
Assembly instructions
Control unit set-up
The control unit is equipped with 3
female connectors.
• Plug the cables into the relevant
connectors, which can be easily
identiied thanks to the colours.
CDI assembly
• Position the Force Master 2.1 CDI
into the helmet holder (Fig. 1) and
run the wires to the engine, taking
care that they will not be damaged.