If warning seals peel off or become soiled and impossible to read, you should contact the
dealer from which you purchased the product to order new seals and affix the new seal(s)
in the required location(s).
Never remodel the product. We won't warrant the machine, if you use the remodeled
product or you don't observe the proper usage written in the manual.
SYMBOLS ON THE MACHINE
For safe operation and maintenance, symbols are carved in relief on the machine
According to these indications, please be careful not to make a mistake.
(a). The port to refuel the "MIX GASOLINE"
Position: fuel tank cap
(b). The port to refuel the "CHAIN OIL"
Position: oil cap
(c). The indication regarding the switch. Flipping the engine
switch to the " O" (STOP) direction, the engine stops.
Position: rear-left-of the unit
(d). The indication regarding the choke,
Pulling out the choke knob, the choke closes.
Position : rear-right of the unit
(e). The indication regarding the chain oil adjuster nut.
"MIN" direction-the oil flow decrease
“MAX” direction-the oil flow increase
Position : bottom of the clutch side
(f). The position of H-needle
The position of L-needle
The position of idle adjusting screw
Position : rear-left of the unit
To Next Page
Loading...