MALTEC MasterCut5700W - Specifications

SPECIFICATIONS
1 Chain saw Model 5800
2 Mass(without guide bar and chain) 5.50{kg)
3 Dimensions(without guide bar and chain) 410 x 235 x 265(mm)
4 Fuel Mixture Gasoline 25:1Two-cycle oil
5 Fuel tank capacity 550ml
6 Chain oil MOTOR Oil SAW#10W-30
7 Oil tank capacity 260ml
8 Engine displacement 58 (Cm3)
9 Maximum engine power 3.8kw/11000rpm
10 Maximum engine speed with cutting
attachment
11000rpm
11 Maximum Engine speed at idling 3300rpm
12 Maximum cutting length 40cm
13 Sprocket 7Tx0.325
14 Saw chain type K2 (CARLTON)
15 Saw chain pitch 0.325(in)
16 Saw chain gauge 0.058(in)
17 Guide bar type Sprocket nose
18 Guide bar size 16.18.20(in)
19 Oil feeding system Automatic pump with adjuster
NOTICE: Specifications are subject to change without notice.
CE declaration
Malis B. Machoński sp. K. Declares that the device MalTec Petrol chainsaw
MasterCut5700W meets all the requirements of the EC Directive 2014/30 / EU and meets
the following standards:
EN 55012:2007+A1:2009
EN ISO 14982:2009,
IEC 61000-4-2:2008
IEC 61000-4-3:2006+A1:2007+A2:2010
Importer:
Malis B. Machoński sp. k.
ul. Zbożowa 2E, Wysogotowo
62-081 Przeźmierowo
www.maltec.pl