Malvern Mastersizer 3000 Manual

Maintenanc e
102
Consumable kits
Consumable kits and additional spares for maintaining the Hydro series wet dispersion
units are available from your Malvern representative. Please contact them for full details
and requirements.
The consumable kits include the following components:
Hydro LV consumable kit
Standard wet cell Solvent resist (SR) wet cell
Quality Audit Standard (QAS) - pack of 10 2.5g
vials
Quality Audit Standard (QAS) - pack of 10 2.5g vials
Tygon sample pipe (350 mm) Solvent resist Tygon sample pipe (350 mm)
Lens tissues Lens tissues
Standard wet cell windows and seals pack (FKM)
Solvent resist wet cell windows and seals pack
(FFKM)
Hydro MV and SM consumable kit
Standard wet cell Solvent resist (SR) wet cell
Quality Audit Standard (QAS) - pack of 10 0.4g
vials
Quality Audit Standard (QAS) - pack of 10 0.4g vials
Tygon sample pipe (350 mm) Solvent resist Tygon sample pipe (350 mm)
Lens tissues Lens tissues
Standard wet cell windows and seals pack (FKM)
Solvent resist wet cell windows and seals pack
(FFKM)
Hydro EV consumable kit
Standard wet cell Solvent resist (SR) wet cell
Quality Audit Standard (QAS) - pack of 10 2.5g
vials
Quality Audit Standard (QAS) - pack of 10 2.5g vials
Tygon sample pipe (350 mm) Solvent resist Tygon sample pipe (350 mm)
Lens tissues Lens tissues

Malvern Mastersizer 3000 Specifications

General

Measurement principle	Laser diffraction
Blue laser wavelength	470 nm
Sample dispersion options	Wet and dry dispersion
Data acquisition rate	10 kHz
Particle size range	0.01 to 3500 microns
Laser type	He-Ne and solid state
Accuracy	Better than 1%
Repeatability	Better than 0.5%
Technology	Mie and Fraunhofer theories
Sample dispersion units	Hydro MV, Hydro LV, Aero S
Optical model	Mie theory
Power requirements	100-240 V, 50/60 Hz
Detector arrangement	Log-spaced array