Malvern Mastersizer Series User Manual

Particle sizing specification A-1
Optical unit specification A-2
Computer requirements (minimum) A-4
Mastersizer programme specification A-5
Software Revision Level A-6
Appendix B - Chemical compatibility
Introduction B-1
Components in contact with sample and dispersant B-1
Wet sample measurements B-1
Dry sample measurements B-1
Spray measurements B-2
Appendix C - Remote interlock
Remote interlock C-1
Appendix D - Estimating the absorption
Introduction D-1
Estimating the absorption using concentration measurements D-1
Appendix E - Advice for continuous sprays
Introduction E-1
Arrange for the spray to be extracted E-1
Use the correct optical configuration E-1
Positioning the spray nozzle E-1
Don’t spray the optical unit E-2
Ensure the spray is stable during measurement E-2
CONTENTS Getting Started
Page vi MAN 0101

Malvern Mastersizer Series Specifications

General

Measurement principle	Laser Diffraction
Compliance	ISO 13320, USP <429>, EP 2.9.31
Particle size range	0.01 μm to 3500 μm
Light source	Red laser, Blue laser
Sample dispersion	Wet or dry dispersion
Software	Mastersizer software