To Next PageTo Next Page
Need help?Do you have a question about the Malyan M200 and is the answer not in the manual?
General| Product | FDM Desktop 3D Printer |
|---|---|
| Usage | Rapid Prototyping, print 3D models, samples, parts, toys. |
| Construction | ABS with power-coated steel reinforcement |
| Filaments | 1.75mm diameter ABS or PLA |
| Certificate | CE, ROHS, FCC, ISO 9001:2008 |
| Warranty | 12 months |
| Extruder | Single |
| Nozzle diameter | 0.4 mm (0.015 in) |
| Positioning Precision | XY 11 microns (0.0004 in), Z 2.5 micron (0.0001 in) |
| Layer Resolution | 100 micron (0.0039 in) |
| Platform heating | 60℃ for printing ABS, N/A for PLA |
| Nozzle heating | 230℃ for printing ABS, 190℃ for PLA |
| Build Surface | platform tape with glass paper |
| Input Power | 100-240V, Max:120W |
| Interface | USB and SD |
| Supported File | STL, OBJ |
Weight and Dimensions| Product Dimension | Approximately 28.3x19.0x33.8 cm |
|---|---|
| Build Volume | 12.0x12.0x12.0 cm |
| Shipping Box | About 42.0x24.0x24.0 cm |
Covers numbered list of precautions for safe operation.
Covers specific danger and caution blocks for user awareness.
Details on calibrating nozzle to bed distance for optimal printing.
Setting target temperatures for the hot end and heated bed.
Instructions for installing the filament rack and feeding filament.
Overview of slicing engine, G-code generation, and printer host.
Steps to download and begin the Cura software installation.
Configuring installation location and selecting software components.
Completing the software setup wizard process.
Navigating the main Cura screen and adding the printer.
Choosing machine type and configuring custom parameters.
Procedures for initiating the first print and removing the finished part.
How to print models directly from an SD card.
Solutions for print defects and mechanical problems.
Resolving software timeouts and connection errors.
