Prior to operation, check the unit and power cord for physical damage.
Do not use if physical damage has occurred.
Before plugging the unit into a power outlet, ensure that the outlet
provides the same type and level of power required by the device.
Unplug this device from the power source when not in use.
Take care to prevent damage to the power cord. Do not allow it to
become crimped, pinched, walked on, or become tangled with other
cords. Ensure that the power cord does not present a tripping hazard.
Never unplug the unit by pulling on the power cord. Always grasp the
connector head or adapter body.
04
INTRODUCTION
Thank you for purchasing this 3D printer from MALYAN! This printer
features a single extruder, which is capable of printing in PLA, ABS,
and other materials. You can print from a Windows® or Mac® PC
using a USB connection or can print from 3D model les stored on a
memory card, without the need for a PC connection of any kind. This
printer is easy to setup and easy to use following the instructions in
this manual.
FEATURES
Single extrusion print head
Can print PLA, ABS, wood, Copper Fill, Steel Fill, Bronze Fill, and other
materials
Open frame design for ease of use and maintenance
Includes a memory card with Cura, Repetier-Host, and a sample 3D model
To Next Page
Loading...
