Malyan MA10 Mini - Optional Wi-Fi Setup; Wireless Connection Guide; Wi-Fi Setup Notes

OPTIONAL WI-FI SETUP
You can connect the printer wirelessly to a 2.4GHz Wi-Fi® network to print
models from your Android™ phone or tablet. Perform the following steps to
setup the Wi-Fi connection for your device.
1. Open Notepad on your PC to create a new le.
2. Copy the below block of gcode into the empty text le.
3. Replace the SSID in the gcode with your network SSID and the
PASSWORD in the gcode with your network's password. Your password
cannot contain any semicolons.
4. Save the le using the lename WiFi.gcode onto a microSD™ card.
5. Insert the microSD card into the card slot on the printer.
6. Select Print from the printer's Main Menu. The printer will read the
contents of the microSD card.
7. Locate and select the WiFi.gcode le. Once the printer centers the print
head, the process has been completed and your printer should connected
to your Wi-Fi® network.
Gcode Block
M106 S0 ; turn fan o in case it was already on
M106 S200 ; turn fan on to signify start
G28 X Y ; home X & Y to signify start
;
;
12
Notes:
1. You may have diculty connecting to the Wi-Fi® network if you have a
2.4GHz and 5GHz network with the same SSID. Try changing the SSID of
the 5GHz network if this occurs. For best results, move the printer to a
location closer to the Wi-Fi router or access point.
2. The printer cannot use both a Wi-Fi and USB connection.