Photographing to conform to purposes
Self-Timer
The shutter is released about 10 seconds after pressing the self-timer button. The LED on the front of the
camera illuminates for about 8 seconds, then blinks for about 2 seconds and then the shutter is released.
1. Fix the camera to a tripod.
2. Press the self-timer button.
-
up lever and press the self
-
ti
mer mode cancels itself automatically.
• When the shutter is set to "B" (bulb), the self-timer does not operate.
• To override the self-timer, after having pressed the release, press the self-timer button
again. Then the self-timer lamp will go out and then the self-timer mode will be canceled.
• When using the self-timer the camera must rest on a steady support.
Precaution when Self-timer Photographing
• When battery check, the self-timer sometimes does not function because of the fact that the
amount of the battery to be consumed for shutter release function is different from that of the
timer functioning. In such a case, replace the battery with a new one.
29
To Next Page
Loading...
