Mamiya C330 User Manual

9
• Loading Film
1. Open the back cover and pull
out the spool change knob (22). then
insert an empty spool into the take-
up spool chamber ( 38 ) so that it
engages the winding axis. Release
the spool change knob.
Pull out the spool change knob ( 29 ).
and insert a
roll of film in the film
chamber ( 40).
PRECAUTIONS
By turning the spool change knobs
(
22 ) and ( 29 ) either to the right or
left after pulling them outward. the
knobs stay at their protruded posi-
tions. Turn
the knobs backward to
reinsert them.
If both spool change knobs are not
returned to their original positions
after loading a film. unbalanced film
winding will result.
Should
the spool change knob not
return to its original position. move
the spool slightly to the front and
rear
or up and down.
2. Pull out the leader paper of the :
film and guide it into the slit of the
take-up spool. turn the film wind
crank (6) clockwise
until the start
mark on the leader paper matches
the start marks (39) on the calTJera.

Mamiya C330 Specifications

General

Brand	Mamiya
Model	C330
Category	Digital Camera
Language	English