Mamiya C330 User Manual

•
23
Changing the Back Cover
The back cover of this camera can
be exchanged with the exclusive back
cover
for single exposure attachment.
Release the back cover catch button
and open the back cover halfway. In
this condition, slide the back cover in
the arrow direction ( as shown in the
picture ) while depressing the back
cover hinge release (
33 ).
When
the back cover is fully opened,
the back cover also can be detached
by sliding it horizontally while de-
pressing the tip of the hinge release
from the inner side of the back
cover. When
installing the back cover,
press
the hinge release with the
hinge of the cover while inserting the
hinged shaft of the back cover in the
body receiver, sliding the back cover
in
the reverse direction from detach-
ing it.
• Tripod Socket
In addition to a tripod, a grip
holder, pistol grip, paramender, and
so
forth can be attached to the tripod
socket ( 34 ) on the camera base.
Those persons who own a
tripod
with a 3/8 in. tripod screw can attach
their tripod as follows. First, remove
the securing screw located in the in-
terior of the tripod socket with a
driver,
turning the screw counterclock-
wise. Next, fit a coin to the groove
of the tri pod socket and remove the
tripod screw by turning it counter-
clockwise; thus the screw receptacle
on
the camera body will accept a 3/8
in. screw.

Mamiya C330 Specifications

General

Brand	Mamiya
Model	C330
Category	Digital Camera
Language	English