Mamiya ZE-2 - Page 21

9
l. Attach the top cover to the camera body and set the selector to Auto
position.
2. Mount the lens of E:-.1 - 18 camera shake 1~arning tes ter to the camera.
3. Set the knob
of the tester
to "30".
(Fig . 21)
4. When LEO lights
up at 1/30 and
LT in turning
the lens aper-
ture ring, the
warning buzzer
must sound.
Fig.21
Fig. 21
EN-18 Camera shake Karning tester
S. When shift i ng the knob to "60", the buzzer must sound at 1/60 sec. and
slower shutter speed thand 1/60 sec. check a1so "125" and "250".
Note: 1) Notwithstanding a camera body is correct in chccking with EN-18
warning tester, the buzzer sounds incorrectly when mounting a
certain lens.
In above case, replace the lens signa! board with ncw one.
(Fig. 22)
2) For sorne other trouble please
refer to the text chapter "8".
-1 9 -
Fig.22