Mamiya ZE-2 - Adjustment of Viewfinder Infinity; Rep1 Acement of Mirror and Mirror Angle 45 Degrec; Dj Ustment of Viewfinder Infini Ty; Hcw to C1 Can up Inside of the Finder

6. Adjustment of viewfinder infinity
6-1 Replacement of mirror and mirror angle 45 degree
6-2 Adjustment of viewfinder
infinity
6-3 How to clean up inside of the finder
Please refer to the ZE camera service instruction book chapter "5" page 27
to 30 for above three.
6-4 Body f1ange back
45
S
+ o. 02
. - 0. 05
When changing ~n 100-21211 bayonet ring or m1 00-21112 front hausing, you
should check and adjust the body flange back as follo~s.
A. Check
l. Set the dial gauge to Zero by using
the T-2 block gauge 45.5 mm.
(Fig. 23)
2.
Retighten four
fixing screws of
bayonet ring and
eight screws of
the front hous-
ing assembly.
(Fig . 24)
PB2x4Ni-
U-1
Fig.23
Fig.24
- 20 -